Analogue Shore-Hardness durometer HBA 100-0
Description
Shore hardness testers, analogue, HB
Compact handheld durometer for plastics with drag indicator.
-Typical application: measurement of penetration (Shore)
-Material thickness of the sample, min. 4 mm
-Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are often not possible because of very narrow standard tolerances
-Shore A rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materials and Shore D for plastics, formica, epoxides, plexiglass etc.
-Max mode: Holds the maximum value in the display
-Point mode: Shows one instant value
-Can be attached to the test stands TI-A0 (for Shore A) and TI-D (for Shore D)
-Screws to screw on to the TI: M7 fine thread
-Delivered in a wooden carrying case
Specifications
Precision: 3 % of measured value
Dimensions (L x W x H): 60 x 25 x 115 mm
Net weight: approx. 160 g
Measuring range: 100 HA HS
Readability: 1,0 HA HS
Â
Type HBA 100-0
Pack: 1 eachSpecifications
- Producent
- Kern & Sohn
- Qty per Salesunit
- 1 each
- Sales Unit of Measure
- EA
- UNSPSC
- 41114611 Hårdhedsmålere
- Any questions, please contact
- Janni B. Nielsen, jbn@buch-holm.dk, +45 44540017
Analogue Shore-Hardness durometer HBA 100-0
Description
Shore hardness testers, analogue, HB
Compact handheld durometer for plastics with drag indicator.
-Typical application: measurement of penetration (Shore)
-Material thickness of the sample, min. 4 mm
-Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are often not possible because of very narrow standard tolerances
-Shore A rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materials and Shore D for plastics, formica, epoxides, plexiglass etc.
-Max mode: Holds the maximum value in the display
-Point mode: Shows one instant value
-Can be attached to the test stands TI-A0 (for Shore A) and TI-D (for Shore D)
-Screws to screw on to the TI: M7 fine thread
-Delivered in a wooden carrying case
Specifications
Precision: 3 % of measured value
Dimensions (L x W x H): 60 x 25 x 115 mm
Net weight: approx. 160 g
Measuring range: 100 HA HS
Readability: 1,0 HA HS
Â
Type HBA 100-0
Pack: 1 eachSpecifications
- Producent
- Kern & Sohn
- Qty per Salesunit
- 1 each
- Sales Unit of Measure
- EA
- UNSPSC
- 41114611 Hårdhedsmålere
- Any questions, please contact
- Janni B. Nielsen, jbn@buch-holm.dk, +45 44540017