This website uses cookies to enhance your experience.
Please note: This website doesn't support Internet Explorer. Please use another browser.

CHROMAFIL Xtra disp. filter CA-20/13 cell. acetate

Item No. 7971473
Syringe filter CHROMAFIL®, Cellulose acetate (CA) CHROMAFIL® syringe filters are used for filtration of suspended matter from liquid samples. HPLC-Certification available on the internet Polypropylene housing: Better solvent stability compared to acrylate and polystyrene filters Shells
This product cannot be ordered at the moment.
Description

Syringe filter CHROMAFIL®, Cellulose acetate (CA)
CHROMAFIL® syringe filters are used for filtration of suspended matter from liquid samples. HPLC-Certification available on the internet

Polypropylene housing: Better solvent stability compared to acrylate and polystyrene filters

Shells ultrasonically sealed, not glued: No extractable components from glues

Filtration in both directions possible, the liquid cannot bypass the membranes

Luer lock on side of entry: Safe connection on the ''high pressure'' side

Luer exit: Standard luer for 3mm and 25mm filters, minispike luer with low dead volume and small OD for 15mm filters

Deflector: The stream of liquid is broken and distributed, and does not directly hit the membrane: this prevents rupture of the membrane
Star-shaped distribution device: The liquid is evenly distributed to the whole membrane surface: this results in a better utilisation of the total area; the filter is not rapidly clogged up; high flow efficiency

Colour coded: Filters with 0.2µm pores have a yellow upper housing, for filters with 0.45µm pores this is colourless; the different membrane types are distinguished by different colours

Low dead volume: ~80µl for 25mm, 12µl for 15mm, 5µl for 3mm.

 

Chromafil Xtra:
Labelled for method validation and certification. Colour-free plain polypropylene housing. Imprint for direct identification of the membrane type, diameter and pore size.
Hydrophilic membrane for filtration of water-soluble oligomers and polymers, especially suited for biological macromolecules. Very high shape stability in aqueous solutions extremely low binding capacity for proteins (21µg/ 25mm filter).

Specifications
The membrane housing consists of polypropylene (PP). This material is very resistant towards most solvents and has a very low extractable substances content. Thus it can be used with almost all solvents, acids and bases (see table). The especially thick rim of the housing is ideal for use with laboratory robots (e.g. Benchmateä). Filter inlet and filter outlet can be fitted to the CHROMABOND® columns for selective sample preparation with the aid of a special adaptor. All filters can be autoclaved at 121°C and 1.1bar for 30min.

Type non sterile (100 pcs)
Filter diam.: 13 mm
Pore size: 0.20 µm
Housing PP-colourless/labelled

Specifications
Producent Macherey-Nagel
UNSPSC 41104922 Sprøjtefilter
Qty per Salesunit 100 each/pack
Any questions, please contact Kundeservice - b-h@buch-holm.dk
    Loading
    Loading