Disposable vacuum filter units , Description FP 30

Disposable vacuum filter units

For the ready-to-use filter units only virgin raw material is used. This ensures that there is no interaction with the sample to be filtered, provided that the units are used properly. The filter units are intended for laboratory use only and at temperatures up to 60°C.
Note: If syringes with a volume <10 ml are used, a pressure could be created which exceeds the max. operating pressure (700 kPa/7 bar) of the filter unit.
Filters with integral pre-filter have a higher hold-up volume.
EtO-sterilized = endotoxin free according to LAL-Test (USPXXIII),
Sensitivity: 0.25EU/ml.
Housing type A + B:
Type: 30mm
Effective filter area: 5.7cm²
Hold-up volume after air cleaning: ≤ 50µl
Inlet: Luer-Lock Inner cone (female)
Outlet A: Luer slip cone (male)
Outlet B: Luer-Lock outer cone (male)
Description FP 30/0.8 CA-S
Housing A