Flame Photometer PFP7

- industrial analysis
- low temperature
- incl. Na, K, Ca, Ba und Li filters
- electronic flame failure detection
- fine & coarse sensitivity controls
- operates on propane, butane, natural gas or L.P.G. supplies

Fitted with automatic flame failure detection for user safety, making it ideal for use in clinical, industrial and educational applications.

Supplied with: Fitted with electronic flame fail safe and supplied with Na, K, Li, Ba & Ca filters, connecting hoses and clips, compressor plug, drain trap, fuses and operating/service instructions
Specifications
Ranges:
Limits of detection
Na/K:
Li:
Ca:
Ba: 0 to 199.9ppm

< 0.2ppm
< 0.25ppm
< 15ppm
< 30ppm
Reproducibility: < 1% / Coefficient of Variation for 20 consecutive samples using 10ppm Na set to read 50
Linearity: Better than 2% when concentration of 3ppm Na/K and 5ppm Li are set to read 100
Specificity: Interference from Na, K and Li equal in concentration to test element will be < 0.5%
Recorder o/p: Nominal 1.00V for a reading of 100.0
Electrical:
Air:
Fuel: 90 - 125V or 190 - 250V 50/60 Hz
Moisture and oil free 6 l/min at 1 Kg/cm² (14psi)
Propane, Butane, natural gas or L.P.G.
Size:
Weight: 420 x 360 x 300mm
8kg
Supply requirements: 230V, 50Hz
Type PFP7