The InLab® Expert electrode has been designed with long life in mind.
The fine-pored ceramic junction used in conventional electrodes can easily become contaminated in critical media such as suspensions and wastewater. In contrast the InLab® Expert electrode with a solid polymeric electrolyte requires no junction at all. As a result these sensors are particularly insensitive to contamination.
The reference electrode on these sensors is in direct contact with the measured medium by means of two open junctions, hence there is no junction to block. In addition, the high grade plastic (PEEK) shaft offers a high level of chemical resistance and robustness. Service life and measurement accuracy are further improved by the ARGENTHAL™ reference system which reduces loss of silver chloride from the reference wire at differing sample temperatures.
A versatile, combination pH electrode with integrated temperature sensor and fixed cable with DIN/4 mm banana plug.
Ideal for a wide range of applications including emulsions, suspensions, effluent water and solutions containing proteins and sulphides.
pH-range 0 ... 14
Temperature range °C 0 ... 100
Response time (98% between pH 4...7) < 20 sec.
Shaft material PEEK
Membrane resistance (25 °C) < 250 MOhm
Temperature probe NTC 30 kOhm
Reference system ARGENTHAL™
Reference electrolyte XEROLYT® Polymer
Shaft length 120 mm
Shaft diameter 12 mm
Cable and connections 1.2 m, DIN/4 mm banana plug
Type of membrane glass U
Storage longterm FRISCOLYT-B® (51350076) in watering cap
Storage shortterm 3 mol/L KCl, buffer pH 4 or 7
- Kabel, DIN
- Temperature [°C]
- Diameter [mm]
- Length [mm]
- InLab Expert
- 41115604 pH-elektroder
- Qty per Salesunit
- 1 each
- Any questions, please contact
- Hans-Henrik Ulm, email@example.com, +45 44540022